Our tests are based on ASTM (American Society for Testing and Materials) standards. The ASTM test methods for our standard oil tests are as follows:

 

              Spectral Exam: D5185

              Flash Point: D92

              Insolubles: D96

              Viscosity: D445

    Are you changing your oil often enough? Too often? Is synthetic oil really worth it?
Years ago, the commercial multi-weight oils on the market were ...
    New diesel engines cost up to $20,000 each, so it only makes sense to take care of yours.
Oil analysis can identify insidious problems that ...
    You want to keep your motorcycle running as long as possible, and oil analysis is a
terrific tool for doing so. We've seen samples from most of the motorcycles ...
    Industrial groups have traditionally changed oil on an elapsed time basis.
This can result in dumping millions of gallons of good oil annually ...
    Air-cooled aircraft engines are twitchy, heat-sensitive machines that vary widely in wear
depending on the aircraft, the cylinders, and how they’re operated. ...
    Sea-going engines require special attention in oil analysis. They tend to pull heavy and constant
power for long periods of time, in holds with little air ...
    Transmission and gear oils can be contaminated with metals and moisture,
and those contaminants should be removed before they can damage the system ...
    We will email your results to you, though they are also available online.
You'll need your client ID to sign in or register ...
Top of Page
©2012 Copyright, Blackstone Laboratories. All Rights Reserved.